A/C Solutions BMW E30 Bracket and Hardware Kit
For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C lines and filter drier for an OEM-like installation. This is a great kit if you're looking to install our Sanden Conversion Kit into a non-A/C equipped E30 or undergoing light restoration and want to refresh your engine bay.
Note: Our low-pressure suction lines may differ slightly from your original part and are designed to use the medium size hose clamps for #4 in the diagram.
What’s in the box?
- A/C Solutions hose bracket holder (low-pressure line) (#1)
- Body spacer (high-pressure line) (#2)
- Hose clamp (large) (#3)
- Hose clamp (mid) (2x) (#4)
- Hose clamp (small) (2x) (#5)
- ST 10mm trim screw (long) (#6)
- ST 10mm trim screw (mid) (2x)(#7)
- ST 10mm trim screw (short) (3x) (#8)
- Expanding body nut (5x) (#9)
- M6 lock nut (#10)
- M6 lock washer (#11)
- M6 washer (#12)
- 10mm body speed clip (#13)
Cross reference part numbers: 64121379221, 12141305028, 12427840406, 64501380494, 07119916970, 64501380494, 64501372610, 16111152613, 07119916965, 07129922705, 64531372613, 07119931044, 07119933082, 17111150170, 645313057128, 64501380496
Stuff our lawyers made us write
Stuff our lawyers made us write
DISCLOSURE: It is imperative that the system be flushed and decontaminated prior to installing the new components. Evacuation of Freon (R12 or R134a), must be done by a certified A/C shop as its chemicals are toxic and harmful to the environment.
CA PROP 65 WARNING: This product can expose you to tetrafluoroethylene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.